Cost guide
Slab leak repair cost
A slab leak is a leak in a water or drain line under a concrete foundation. The price depends mostly on how the plumber reaches the pipe: from inside it, through the slab, or by abandoning it and running new pipe elsewhere.
Last reviewed Nov. 18, 2026. Figures are national ranges from the sources cited on this page.
At a glance
- Pipe lining (HomeGuide)
- $500 – $3,500[1]
- Dig and replace pipe
- $700 – $5,000[1]
- Typical repair (Fixr)
- $1,000 – $4,000[2]
- Fixr national average
- $2,500[2]
Published national ranges; your local price may differ.
What slab leak repair costs
HomeGuide puts slab leak repair at $500 to $3,500 for pipe lining and $700 to $5,000 for digging into the foundation and replacing the pipe. Replacing the whole slab costs $5,400 to $10,800 [1]. Fixr's typical range is $1,000 to $4,000, with most people paying about $2,500 for leak detection, tunneling repair and foundation crack filling. Its low end is $600, and its high end is $15,000 for rerouting all pipes out from under the slab [2].
Cost by repair method
| Method | Typical cost (HomeGuide) | What it involves |
|---|---|---|
| Seal cracks | $100 – $200 [1] | Seals small slab cracks; doesn't fix the pipe |
| Patch | $250 – $800 [1] | Epoxy or hydraulic cement; one part of a fix |
| Replace damaged pipe section | $200 – $2,000 [1] | Cut out and replace the bad section |
| Dig or break the slab | $500 – $3,000 [1] | Access to the pipe through the floor |
| Pipe lining (CIPP) | $500 – $3,500 [1] | Coats the inside of the pipe, no digging |
| Repair the water main | $400 – $5,000 [1] | Main line at the slab edge |
| Reroute plumbing | $3,900 – $7,500 [1] | Abandon the line, run new pipe above |
| Replace the slab | $5,400 – $10,800 [1] | Full slab replacement |
HomeGuide notes that rerouting is a complex job but often less invasive than digging into the foundation [1]. Cured-in-place pipe lining runs about $90 to $250 per linear foot [1].
Other costs to expect
- Foundation inspection to find the leak: $300 to $750 [1].
- Plumbing permit: $30 to $500, often included in the contractor's price [1].
- Plumber labor: Fixr lists $45 to $200 per hour, with most people paying $75 to $130 [2].
- Emergency plumbing on nights, weekends or holidays: $100 to $350 or more per hour [1].
- Mold remediation if the leak ran for a while: $1,500 to $6,000 for an average job [1].
Signs of a slab leak
HomeGuide lists these warning signs [1]:
- Cracks in the foundation
- A water bill that suddenly jumps
- Sudden changes in water pressure
- The sound of running water when all fixtures are off
- A warm spot on the floor over hot water pipes
How long it takes
Plumbers can usually fix a slab leak in 1 to 3 days, per HomeGuide. If flooring or cabinets were damaged, the whole job can take several weeks, including waiting for materials [1].
Frequently asked questions
How much does it cost to fix a slab leak?
HomeGuide puts most slab leak repairs at $500 to $3,500 with pipe lining or $700 to $5,000 to dig and replace pipe [1]. Fixr's average is $2,500 [2].
Is rerouting better than digging through the slab?
It depends on the house. HomeGuide says rerouting ($3,900 to $7,500) is complex and time-consuming but often less invasive than digging into the foundation [1]. Ask each plumber to explain why they recommend a method.
How do I know if I have a slab leak?
Common signs include foundation cracks, a sudden jump in your water bill, changes in water pressure, running-water sounds with fixtures off, and warm spots on the floor [1].
Does homeowners insurance cover slab leaks?
We don't comment on coverage. It depends on your policy and the facts of the loss. Read your policy and talk to your insurer or agent.
Sources
Cost figures are national ranges published by the sources below, as of the dates shown. Local prices vary. We don't invent or adjust numbers.
- HomeGuide, How Much Does a Slab Leak Repair Cost? (2026).
- Fixr, Slab Leak Repair Cost.